Industrial Valves and Controllers

• Bolted body-bonnet design for valves up to Class 800. Valves with welded bonnet also available on request
• Screwed with seal-welded body-bonnet design for valves of Class 1500
• Bellows-sealed Gate and Globe valves available in Class
• 800
• Bolted body-bonnet joints provided with spiral-wound
• stainless steel gasket and graphite filler for ma ximum
• protection against leaks
• Die-formed graphite inner packing rings and braided
• graphite end rings with Inconel wire reinforcement and
• corrosion inhibitor
• T-head stem-disc connection of gate valve fully meets
• strength requirements of API 602 and API 598
• Rolled ACME thread on stem for smooth operation
• Tapered shoulder on the stem for back seating
• Self-aligning type gland assembly with stud-and-nut
• tightening
• Integral hard-faced body seat for globe and check valves
• Spring-loaded disc on check valves suitable for non-
• horizontal applications too
• Gate and globe valves can be offered with electrical
• actuators
• Austenitic SS forging for body and bonnet of Cryogenic
• valves, resulting in excellent impact strength, minimal heat
• loss and resistance to corrosion
• Valves can be offered to NACE MR-0175 and other special
• NACE requirements
• Valves can be supplied with IBR certification

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Description

With prosperous industry practice, our entity has gained huge appreciation in the market by presenting Globe Valves to our respected patrons.

Salient Features :

• Body and bonnet - Cast with uniform sections, precision machined.
• Body : Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
• Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
• Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
• Stem - One-piece construction with forged T-head - Long service life, smoother operation.

Our company has sculpted a remarkable place in the market as a reputed manufacturer and exporter of Industrial Piston Valve. Our diligent manpower uses quality grade mild steel to manufacture this valve. This valve is used in chemical, water treatment, pharmaceutical and oil refineries. To provide the flawless range to clients, we check this valve on defined quality parameters. We offer Industrial Piston Valve at reasonable prices.

Features:

• Robust construction
• Can withstand high pressure
• Corrosion proof

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

The company is engaged in the manufacturing and supplying of superlative quality Gunmetal Valves and Bronze castings. These products can be procured as per customer requirements in BS, IS, JIS, DIN, ASTM ,SAE and other international standards. Backed by an advanced in-house Wet lab and online Spectro Meter analysis facility, we are able to offer superior range of products to the customers. These are well known in the market for the following reasons:

 

• High Ductility
• Resistance to Corrosion
• Good Flexibility
• Heat Resistance
• Outstanding Material Strength
• Efficient performance
• Shock Resistance

Request
Callback

Additional Information:

• Item Code: EMEI-GM-VALVE
• Port of Dispatch: EX-WORK , MUMBAI
• Production Capacity: 1000 - 10000 Pieces
• Delivery Time: As per order Quantity

UKL Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them. The Klinger Piston valve works on the principle of Resilient rings in conjunction with a Metallic Stainless Steel Piston, that moves vertically between the rings, giving a Seal that is both effective as well as Durable. This sealing system gives a bubble tight shut off, equivalent if not superior to Class VI leak standards.The Sealing rings are the heart of the valves, are available in Non Asbestos, Tanged Graphite, and Graphited Asbestos varieties, to effectively handle more than 250 Industrial Media.

Audco Valves manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design.

The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.

Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.

Gate Valves:

• API 600/ISO 10434
• 2" to 72"
• ASME class 150 to 2500

 

Salient Features:

• Body and bonnet - Cast with uniform sections, precision machined.
• Body: Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
• Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
• Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
• Stem - One-piece construction with forged T-head - Long service life, smoother operation.

Globe Valves:

• BS 1873
• 2" to 24"
• ASME 150 to 2500

 

Salient Features:

• Body and Bonnet - Cast with uniform sections, precision machined.
• In-situ hard-faced body seat - Eliminates leakage path between seat ring and body.
• Guided plug-type disc, Free-floating stem-disc connection - Uniform seating.

Check Valves:

• BS 1868
• 2" to 36"
• ASME 150 to 2500

 

Salient Features:

• Body and Bonnet - Cast with uniform sections, precision machined.
• Body: Permits full swing of disc on downstream side - Lower flow resistance and disc erosion.
• Disc: Internally-hinged - No opening on the body, higher integrity.
• Disc secured to hinge using lock nut and pin.
• Disc free to rotate to avoid localized wear.

Audco Valves manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design.The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.

Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.

Gate Valves:

• API 600/ISO 10434
• 2" to 72"
• ASME class 150 to 2500

 

Salient Features:

• Body and bonnet - Cast with uniform sections, precision machined.

INDUSTRIAL ENGINEERING SYNDICATE
We Deals In CS Audco Globe Valve, Flange End.

• Packaging Details: Box

INDUSTRIAL ENGINEERING SYNDICATE
Cast Iron Sluice Valve RANGE: as per IS 14846 Size 32 to 1500mm(Non Rising & Rising) as per BS 5163SIZE: 50mm to 600mm (Non Rising)Pressure Rating up to PN 1.6Spindle :- Bronze / SS

• Rigid and sturdy design
• Low pressure loss across the valve
• Available in Non Rising as well as in Rising Spindle

Type.

• Suitable for clear water up to 45 C and 5000 ppm
• turbidity, other fluids with maximum pressure /
• temperature conditions within the scope of
• IS:14846
• Long service life and leak-tightness even after
• thousands of open / close cycles

APPLICATIONS:-

• Water works
• Water / Effluent / Sewage treatment plants
• Fire Fighting
• Power

INDUSTRIAL ENGINEERING SYNDICATE
We Deals In Alloy Steel Gate Valves.

Stainless Steel Gate Valve manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design.

The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.

Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.

Gate Valves:

• API 600/ISO 10434
• 2" to 72"
• ASME class 150 to 2500

 

Salient Features:

• Body and bonnet - Cast with uniform sections, precision machined.
• Body: Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
• Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
• Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
• Stem - One-piece construction with forged T-head - Long service life, smoother operation.

Globe Valves:

• BS 1873
• 2" to 24"
• ASME 150 to 2500

 

Salient Features:

• Body and Bonnet - Cast with uniform sections, precision machined.
• In-situ hard-faced body seat - Eliminates leakage path between seat ring and body.
• Guided plug-type disc, Free-floating stem-disc connection - Uniform seating.

Check Valves:

• BS 1868
• 2" to 36"
• ASME 150 to 2500

 

Salient Features:

• Body and Bonnet - Cast with uniform sections, precision machined.
• Body: Permits full swing of disc on downstream side - Lower flow resistance and disc erosion.
• Disc: Internally-hinged - No opening on the body, higher integrity.
• Disc secured to hinge using lock nut and pin.
• Disc free to rotate to avoid localized wear.

These Foot Valves are precision engineered valves which are available in various shapes and sizes with us.

Features:

• Rigid and sturdy design with minimum loss of head across the valve perfectly flat seating surface for good sealing preventing entry of foreign body to pump through suction pipe long service life

Range:

• Conforming to is:4038
• Size 50mm to 450mm - cast iron

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Description The DCV2 and DCV3 disc check valves are of the wafer pattern designed to be sandwiched between flanges. They are suitable for use on a wide range of fluids for applicators in process lines, hot water systems, steam and condensate systems etc. Face-toface dimensions conform to EN 558 part 1, series 49.

Sizes and pipe connections DN15,20,25,32,40,50,65,80,100 Suitable for installation between BS 10 Tables 'E and ‘H', BS 4504/(DIN) PN6, 10, 16. 25, 40; JIS 5, 10. 16, 20 flanges with the following exceptions: DN40, 50. 80 and 100 - will not fit between JIS 5 flanges DN65 and 80 - will not fit between BS 10 'E' flanges.

Optional extras Heavy duty springs (700 mbar opening pressure, up to DN65) far boiler teed applications. Viton soft seats for oil, gas and steam applications. EPDM soft seats for water applications.

Limiting conditions Note: Special testing to allow lower temperature operation can be provided at extra cost. Consult Spirax Sarco

We are noteworthy Manufacturer and Trader of supreme grade Knife Gate Valve, Dome Valve, Cast Iron Bend, Ash Handling System, Expansion Bellow and more. These products are widely demanded for their rugged construction. 

The most common application is flow indication. The Sight Glass is fitted in the pipeline to indicate if the fluid is flowing correctly in the line. These can therefore be used to indicate blocked or choked valves or Traps, strainers, pipelines or piping components which otherwise would lead to a decreased level of performance, plant efficiency and safety.

The sight glasses would indicate if the traps are leaking or passing live steam/vapors.A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, protrusion is often incorporated body of its indicator, in the flow stream, so that fluid impinging on the same, cause turbulence, which indicates flow.

This enables one to on observing the working of traps and other equipments by giving a clear view of the inside using toughened Borosilicate original Klinger sight glasses.

• Sizes: 15mm to 50mm
• Material Of Construction :Carbon Steel
• Glasses: Toughened Borosilicate
• Pressure classes: 20 bar ,Temperature max.250Deg C

Features:

• No rotating parts-No maintenance
• Double window-High visibility
• Easy and quick inspection
• Used on condensate lines, Oil lines and heat exchangers, in condensers etc.

Sight Glass

Features & Applications:-

• Available in Centric Wafer / Lugged design
• Single, double eccentric design
• Bubble tight shut off
• Less wear and tear of seal and longer life
• Self-cleaning and non-jamming seat design
• Low operating torque
• Rigid and sturdy design
• Ideal for throtting as well as isoltaion Power plants
• Water supply and sewage
• Chemical and petrochemical plants
• Water works
• Water / Effluent / Sewage treatment plants

• Item Code: XYZ
• Delivery Time: Ready
• Packaging Details: Jute Bag

With the support of our professionals, we have achieved a reliable name as a leading manufacturer and supplier of Thermostatic Steam Traps. These traps are used to discharge condensate and non-condensable gases. The traps open, close or modulate automatically. We manufacture these traps under the firm guidance of expert supervisors using high quality metal, sourced from trusted vendors.Thermostatic Steam Traps come in different sizes and specifications as per client's requirements. We offer these traps at reasonable prices to clients.

Features:

• Sturdy and durable
• Light in weight
• Corrosion resistant

• Item Code: 1111

High efficiency steam strainers for better quality steam.

• Designed to remove solid particles from the steam supply
• Reduce levels of contamination
• Maintain quality of end product

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

With enriched industrial experience and expertise, our organization is actively committed to offering our Cast Iron Sluice Valve.

Specifications:

• Product Standard: IS:14846
• Body Material cum Standard: Cast Iron IS:210 Gr.FG200
• Description: Bolted Bonnet, Inside Screw & Non-Rising Stem
• Type of Seat: Renewable seat
• Type of Disc: Solid wedge
• Trim: Cu-Alloy Rings, stem SS (12 Cr.12)
• Gland Packing: Jute & Hemp / Rubber
• End Details: Flanges as per IS:1538 FF drilled

Other Details:

Product Details: Our company has been involved in manufacturing high quality of C I Non Return Kirloskar Valve. The tools and valves designed in our company cater the broad needs of manufacturing and research enterprises. We have created a robust infrastructure to produce these non return valves at par with the international quality standards. Our valves are appreciated for dimensional accuracy, precision performance and corrosion resistant finish.

Features:

• Best raw material used for durability
• Long Life
• High Performance
• Our valves are appreciated for dimensional accuracy, precision performance and corrosion resistant finish.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Features:

• Audco Globe Valve offered features superior construction standards and finds use in different areas like power sector and others.
• These valves come with ASME ‘N’ and ‘NPT’ stamping as well as in other industry standards as demanded by the customers.
• Some of its features include availability in ½” to 2” in straight pattern and Y-pattern choices, available in different ASME classes as per the patterns, precision construction standards, availability in different construction material choices and others.
• Our range of globe valve body is comparatively bigger in size and is used to handle more pressure.
• We have been appreciated by our clients for its features such as dimensional accuracy, precise functioning and durable.
• Our quality assistants check these globe valve body on well-defined parameters to ensure that these are at par with industrial quality standards.

We are offering Cast Steel Swing Check Valve to our clients.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Neta Valves Pvt. Ltd. is one of the prominent Manufacturers, Exporters and Suppliers when it comes of Cast Steel, Cast Iron, Bronze, Forged Steel & Investment Castings Products our vide Range of products Safety Valves, Water Level Gauge, Moisture Seprator, Check Valves, Ball Valves, Steam Traps, Blow Off Valves, Gate Valves, Globe Valves, Pressure Reducing Valves etc. Based in Jalandhar (Punjab) India. We can make our products available to various parts of the world and that too on the said time.

• Delivery Time: Ready

Uni Klinger Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

Operating Animation

UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

Operating Animation

UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

Steam has two components: 1] the latent heat useful in process for Heat transfer, and 2] the Sensible heat in the form of condensate having only the heat content not useful in process, rather hindering Heat transfer and causing damage to piping equipment due to its presence. Hence, there is need to remove condensate and trapped steam. This is done by Steam trap.

The Thermodynamic Trap works on the principle of difference in the velocities of Steam and Condensate. Used Mainly on Drip lines of the main steam distribution line, uses condensate pressure to open the trap and discharge the condensate and then the Flash steam formed due to the high flash steam velocity & accumulation of flash steam over disc, Device close and trap the live steam when it appears.

Thermodynamic Steam Trap are compact and lightweight and discharge condensate as and when it is formed.

Operating Animation

• Available in Sizes: 15, 20 and 25mm
• End connections: Threaded to BSP/BSPT/NPT, SW and BW, as well as Flanged to #150/300/600/900/1500. e
• Pressure Ranges of 30 bar [UTD21], 55 bar TD55 [Single and Three orifices], 100Bar [UTD 62] AND 250 Bar [UTD120]
• MOC: AISI 420./ 743 Gr. CA40[UTD21/55] / ASTM A217 Gr. WC6[UTD62] / ASTMA 182 Gr. F22 cl3. [UTD120]
• Max. Operating temperature: 425 Deg. C[UTD55] 550 Deg. C. [UTD62/120]

Features & Applications:-

• Available in Centric Wafer / Lugged design
• Single, double eccentric design
• Bubble tight shut off
• Less wear and tear of seal and longer life
• Self-cleaning and non-jamming seat design
• Low operating torque
• Rigid and sturdy design
• Ideal for throtting as well as isoltaion Power plants
• Water supply and sewage
• Chemical and petrochemical plants
• Water works
• Water / Effluent / Sewage treatment plants

In this field we are recognized amongst trusted manufacturers and suppliers of Moisture Separators. These separators are used in industrial valves for separation of moisture. We manufacture these separators under the firm guidance of expert supervisors using best quality mild steel and cast iron. Highly demanded in the market, these separators come in different sizes and specifications for clients. We offer these Moisture Separators at affordable prices to clients.

Features:

• Rust proof
• Sturdy and durable
• Easy to mount

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

INDUSTRIAL ENGINEERING SYNDICATE The company is recognized as a highly trusted supplier of best quality Cast Iron Sluice Valve Kirloskar. This superior range of sluice valve is available in accordance with the quality norms of the industry. This valve ensures product innovation, quality and client satisfaction. Our range of cast iron sluice valve assures accurate control & flawless performance while in operation. Further, this valve is available at a reasonable price..

Features:

• Innovative design
• Superior performance
• Accurate control

Other Information:

• Delivery Time: Ready Stock

Additional Information:

• Item Code: Sluivevalve

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

We Deals in Y-Type Strainers

• Delivery Time: Ready
• Packaging Details: Jute Bag

We Deals In Float Steam Traps. 

A valveis a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, orslurries) by opening, closing, or partially obstructing various passageways. Valves are technicallyfittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latinvalva, the moving part of a door, in turn fromvolvere, to turn, roll.