Uni Klinger

Product Details:

Top grade material based on Klingerit but reinforced with wire mesh for demanding and extreme services. Specially suitable and recommended for conditions of fluctuating temperature and presssure, i.e. when steam hammers might occur or in automotive application. Composed of SBR binder and high grade chrysotile asbestos. Delivered with graphited surface.

• Minimum Order Quantity: 1 Sheet
• Item Code: 68129300
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: pune
• Production Capacity: bundle
• Delivery Time: Ready Available
• Packaging Details: Roll Bundle

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

Operating Animation

UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

• • MOC: Cast Iron and Cast Carbon Steel
  • Available in Sizes: 15 mm – 50 mm
  • End connections: Screwed/Socket weld ends, Flanged ends to #150 / 300 /600
  • Available for working pressure up to 40 bar and Differential Pressure up to 32 Bar

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

UKL High Pressure Gate and Globe Valves are manufactured to the latest International designs, using latest, State of the Art technology and a strict quality control system. These valves are exceptionally Sturdy, Rugged and Durable. They are designed for a tight Seal, ease of operation with inbuilt Quality and Integrity for a long service life

UKL High Pressure Valves are manufactured in Gate as well as Globe valve types.

Gate valves – probably the most common valves in use today, esp.where an uninterrupted flow is required, because the gate fully retracts into the bonnet, creating a minimal pressure drop, when the valve is in an open position. Gate valves are specifically intended for use in isolation applications.

Globe valves -the main advantage is that a globe valve opens more rapidly than a gate valve as the disc only needs to move a small distance from its seat to allow full flow. This is an advantage when there is frequent operation of the valve. The disadvantage is that the fluid has to change course, increasing the resistance to flow and generating turbulence. This results in a higher pressure drop across a globe valve than a gate valve. Globe valves are designed to close off, open up or throttle the flow in a pipeline.

The Pressure Seal Bonnet:

Another very effective type of Bonnet construction, apart from the standard Bolted Bonnet type in a gate/Globe valve is the Pressure Seal Bonnet. This construction is adopted for valves for high to very high pressure service. The unique feature about the pressure seal bonnet is that the Body – Bonnet joints seal improves as the internal pressure in the valve increases, compared to other constructions where the increase in internal pressure tends to create leaks in the body-bonnet joint.

Application Industries: 

Power Stations, Thermal & Cogeneration Power Plants, Nuclear Power Plants, Petrochemical ,Chemical, Process and other General Industries, Sugar, Refineries , Fertilizers, Steel, Off-Shore &On-Shore Platforms.

Media of applications include: Water, Steam [Saturated / Superheated] Oil and Gas, Hydrocarbons, NACE and Sour Services, LNG & Natural Gas, Oxygen and Hydrogen Services and many other Aggressive and Non Aggressive applications.

• RANGE :UKL High Pressure Gate and Globe Valves Sizes: 15mm [0.5¿¿] to 250mm[10¿¿]
• END CONNECTIONS: 15mm to 40mm – Forged Steel, Welded Bonnet, SW / BW Ends 50mm to 250mm Cast Alloy Steels – straight type BWE
• As per ASME B16.34: Pressure Classes 1500 and 2500.
• Materials. ( as per ASME B-16.34 ) # 1500 , # 2500 in A-216 WCB for temperature 0o C to 425deg. C # 1500 , # 2500 in A-217 WC-6 / WC-9 for temperature 00 C to 593deg. C Other material on request

FEATURES:

• Pressure Seal Bonnet Design.
• Stellite Hard faced Seat and Disc
• Direct Retro-fitted Actuator / Gear Box arrangement as applicable
• Graphite Seal rings and Packings.

All valves up to 40mm are Outside Screw and Yoke, Welded Bonnet type, rising stem renewable seat, for Gate valves. Globe valves will have Integral seat.

All valves 50mm and above are Outside screw and Yoke, Rising Stem and with Pressure Seal Bonnet.

Gate Valves shall be with Flexible wedge type Gate. Globe Valves shall have Conical type Disc.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

The most common application is flow indication. The Sight Glass is fitted in the pipeline to indicate if the fluid is flowing correctly in the line. These can therefore be used to indicate blocked or choked valves or Traps, strainers, pipelines or piping components which otherwise would lead to a decreased level of performance, plant efficiency and safety.

The sight glasses would indicate if the traps are leaking or passing live steam/vapors.A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, protrusion is often incorporated body of its indicator, in the flow stream, so that fluid impinging on the same, cause turbulence, which indicates flow.

This enables one to on observing the working of traps and other equipments by giving a clear view of the inside using toughened Borosilicate original Klinger sight glasses.

Features:

• No rotating parts-No maintenance
• Double window-High visibility
• Easy and quick inspection
• Used on condensate lines, Oil lines and heat exchangers, in condensers etc.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

With an impressive record of growth in the industry, we have developed ourselves as the most promising manufacturer and exporter of Spiral Wound Gasket. This gasket is ideal for flanged joints, heat exchangers, boiler handholes and manholes. We use optimum quality mild steel, sourced from trusted vendors to manufacture this gasket. The gasket is also applicable in high-temperature and high-pressure applications. This Spiral Wound Gasket comes in different sizes and diameters as per the requirements of clients. We offer this gasket at pocket friendly prices.

Features:

• Resistant to bend
• Sturdy and durable
• Corrosion proof

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Packaging Details: In wooden box

Product Details:

The Thermodynamic Trap works on the principle of difference in the velocities of Steam and Condensate. Used Mainly on Drip lines of the main steam distribution line, uses condensate pressure to open the trap and discharge the condensate and then the Flash steam formed due to the high flash steam velocity & accumulation of flash steam over disc, Device close and trap the live steam when it appears.

Thermodynamic Steam Trap are compact and lightweight and discharge condensate as and when it is formed.

Operating Animation

• Available in Sizes: 15, 20 and 25mm
• End connections: Threaded to BSP/BSPT/NPT, SW and BW, as well as Flanged to #150/300/600/900/1500. e
• Pressure Ranges of 30 bar [UTD21], 55 bar TD55 [Single and Three orifices], 100Bar [UTD 62] AND 250 Bar [UTD120]
• MOC: AISI 420./ 743 Gr. CA40[UTD21/55] / ASTM A217 Gr. WC6[UTD62] / ASTMA 182 Gr. F22 cl3. [UTD120]
• Max. Operating temperature: 425 Deg. C[UTD55] 550 Deg. C. [UTD62/120]

All the Traps, except UTD120, can be supplied with Isotubs and Blow down cocks.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

We have introduced a wide variety of combinations of non Asbestos packings for all applications.

All packings are available in braided rope form (standard / custom sizes) or ring form (custom sizes).

Uni Klinger provides complete range of non asbestos gland packing in Graphite, Teflon,Aramid,Carbon and Glass fiber. Enabling UKL to cater to Pump,Valve users and original Equipment manufacturers.

Uni Klinger can provide the Gland Packing for other applications where one need tight seal in static or rotating application.

Uni Klinger offers Non Asbestos Gland Packing from 3mm Sq to 25mm

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Uni Klinger Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

Operating Animation

UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

• • MOC: Cast Iron and Cast Carbon Steel
  • Available in Sizes: 15 mm – 50 mm
  • End connections: Screwed/Socket weld ends, Flanged ends to #150 / 300 /600
  • Available for working pressure up to 40 bar and Differential Pressure up to 32 Bar

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

We have introduced a wide variety of combinations of non Asbestos packings for all applications.

All packings are available in braided rope form (standard / custom sizes) or ring form (custom sizes).

Uni Klinger provides complete range of non asbestos gland packing in Graphite, Teflon,Aramid,Carbon and Glass fiber. Enabling UKL to cater to Pump,Valve users and original Equipment manufacturers.

Uni Klinger can provide the Gland Packing for other applications where one need tight seal in static or rotating application.

Uni Klinger offers Non Asbestos Gland Packing from 3mm Sq to 25mm 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Sheets are manufactured in Metallic & Non-Metallic to cover maximum pressure up to 200bar & temperature up to 550 degree C.

Advantages:

• UKL has been approved by BIS to manufacture all grades of sheets with ISI Mark
• Klinger gaskets are designed for 0.25ml/minute leak rateas against 3ml/min allowable leak rate as per DIN3535/6

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

UNISIL soft-chem,The softest PTFE material for applications where just minimal surface pressures are possible.

Multidirectional expanded PTFE material. Excellent corrosion resistance together with superior creep resistance and sealability create a highgrade gasket material for a wide application field. The best choice for economical plant-wide use on services up to 260°C and pressures up to 200 bar.

General Features:

• 100% Pure P.T.F.E.
• Good sealability
• Good flexibility
• Highly compressible
• Resistant to creep and cold flow
• Easy to cut and install
• Low compressive load to seal
• Can seal rough or damaged flanges

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

These are mechanical devices to observe the level of liquid in vessels. Based on  principles of Liquid finding their own levels.UKL manufactures and supplies level gauges as complete assembly with Isolation Drain cocks and vent valves, Safety Ball check arrangement in case of Glass breakage, and original toughened Borosilicate Klinger Glasses and Gaskets.

Reflex Gauge: 

Works on the principle of Total Internal Refraction of light through the Reflex glass having grooves giving clear Black and white indication of the level in the vessel. For Steam at 40 bar saturated temp, and other media 40 bar 400 Deg C.

Transparent type: 

Using Transparent glasses, two in numbers, giving a level indication in the form of rising and falling meniscus. This often requires the use of Illuminators to view the level.Steam at 40 bar.85bar and 120Bar saturated temp. Other media 400 deg C.

Bicolor type: 

A variation of the transparent type, wherein the incident light is made to pass through a wedge shaped centerpiece, to separate the light. The same is viewed through filters to see Green and Red light for Steam and Condensate.Steam: 180 Bar Saturated Temp.

The level gauges can be provided with accessories like double arm lever, Illuminators, Scales, and Non Frosting Blocks. Inclined type as well as Direct Weld – On type.

C-C of 3000mm.Other C-Cs with mounting support can also be provided.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A