Kasta Pipes And Fittings

Product Range – 1” to 4”

Application-
1. Water rising for submersible and jet pump for irrigation, domestic,Industrial mining, chemical distribution.
2. Replacement of MS, GI & SS column pipes
3. Industrial wells & mines

Speciality - Precise O ring locking system square threaded spigot end positive wire locking b/w pipe and coupler which reduces the loosening of joints during on and off of pumps.

PVC Column Pipe for Submersible PumpsProduct Classification – based on bore depth

 

HDPE Pipe System

Ref. Std. IS 4984
Product Range – 20 mm to 630 mm
Pressure Rating – 2.5 – 16 kg/cm2

Materials(PE 63, PE 80, PE 100) Classification Grade Wise – Applications

S1. Domestic – Portable water supplies
2. Lift irrigation scheme and farm irrigation schemes
3. Industrial Purpose

Product classification – based on durability and performance Ref. Std. IS 15265:2003Product Range-

Kasta Flex Regular (2” to 6”)
Kasta Flex Plus (3/4” to 6”)

Application-
1. Suction and delivery of fresh & sea water, sewerage, fertilisers, chemicals, etc.
2. Suction and delivery of petroleum derivatives except higher aromatic content.

Features

• 1. Seal remains intact even in extreme temperature variations.
• 2. Easy and convenient installation with detachable joints.
• 3. Leak proof.
• 4. Resistant to moisture, abrasion and wearing.
• 5. Negligible algae formation due to low opacit.
• 6. Deflection of pipes possible up to 2 0per joint.

Product Range1. 63 mm to 400 mm in 4,6,8,10,& 12.5 kg/cm2pressure rating.

 

 

Applications
1. Supply of portable water in house and residential buildings.
2. Supply of water for irrigation crops.

 

Supply of water for irrigation and construction in hilly areas where temperature is very low ( i.e. 0 deg.C) even in desert areas where temperature is at it’s maximum ( i.e. 50 deg .C )

RPVC Pipes

Ref Std. – IS 4985:2000
Product Range – 20 mm to 400 mm
Pressure Rating – 2.5 – 12.5 kq/cm2
Types – Selfit (Solvent cement jointed) & Elastomeric Ring Joint (EPDM rubber ring jointed)

RPVC Fittings

Moulded as per IS 7834 – Tees, Elbows, Couplers, MTA, FTA, Service Saddles, Reducers, End Caps, Reducing Bush, Reducing Tees

• Fabricated- Bends, Couplers, Repair Couples, End caps etc.

Application-

1. Portable water supply in various sectors
2. Irrigation schemes for agriculture purpose

Ref. Std. – IS 12818:2010Product Classification – Product Range – 90 mm to 225 mm

SDR Series Borewell Casing-
1SDR – 47 (4 kg/cm2) – Borewell depth up to 60 feet ( 18 meter)
SDR – 36 (5 kg/cm2) – Borewell depth up to 80 feet ( 24 meter)
SDR – 31 (6 kg/cm2) – Borewell depth up to 100 feet ( 30 meter)