Industrial Engineering Syndicate

• IS-2712 - 1998
• IS-2712 - 1979 Grade W / 3
• IS 2712 - 1971 Grade C

A Compressed fibre jointing with wire gauze insertion supplied with Graphite Finish. Used for general purpose application where conditions of temeperature and pressure are not too serve.

• Manufactured from selected Asbestos Fibre and bonded with high grade binder compound, this product has a wide range of applications in the industrial field. Recommended against steam, neutral non flammable gases, dyes alkalies, fats, oils, alcohols, motor fuels and such other engineering service conditions which do not warrant the use of as High Grade material such as CHAMPION Style 54 SUPER.

• IS 2712 - 1998 Grade W/2
• BS 2815 - 1973 Grade B

• A high grade Asbestos Fibre Jointing bonded with a sophisticated compound, this specialised jointing withstands the most exacting demands of oil and Petrochemicals plants, solvents refrigerator, oil etc. Used in pipe lines and apparatus of the petrochemical fields, petroleum distillates, oil and petroleum refining industries. It is also recommended in industrial processes with high contents of aromatic substances, sulphurous compounds, chloric hydrocarbons, phenols, refrigerants, etc. Use of CHAMPION oil jointing sheet assures safety and economy even on critical working conditions. The jointing gives satisfactory services against steam also.

Other Details:

• Indian IS 2712 - 1998 Grade 0/1
• IS 2712 - 1971 Grade A/O
• DEFENCE TS RED/71/59
• British BS 1832-1972

• This is a superior grade jointing sheet manufactured from high quality chrysotile asbestos bonded with special grade NBR binder. This is specially designed CAF jointing sheet for application over an unlimited range of critical application. This hitech CAF jointing is suitable for hydrocarbon, fuel oil, solvent, petroleum distillates, alcohol, aromatic substances, phenols, refrigerants, alkalis etc.

Other Details:

• (IS 2712 - 1998 Grade W/1 & 0/1)

• Manufactured from selected quality of Asbestos Fibre and vulcanized with special rubber compound to meet with the exacting requirements of modern industry. Used for application against dry and wet steam water, gases, alkalies, oil at normal tempertaures, chemicals fuels etc. and general engineering. CHAMPION Style 39 can also be provided with wire gauze insertion in graphited finish.

• Indian IS-2712 - 1998 Grade 0/2
• IS-2712 - 1979 Grade W / 2
• British BS 2815 - 1973 Grade B
• Indian IS-2712 - 1998 Grade 0/2
• IS-2712 - 1979 Grade W / 2
• British BS 2815 - 1973 Grade B

• A Compressed Asbestos Fibre Jointing Graphited embedded with a strong reinforcement of steel wire gauze, THE SUPER METALLIC gasket sheet is superior in performance over other forms of Jointing Sheets where severe physical conditions of High Pressure and temperature have to be resisted. It is effectively used under rapidly changing operating conditions of pressure, where vibrations are experienced, where the flange of the gasket joint is narrow, in diesel exhaust manifold, cylinder head gaskets, internal combustion engines andAir Compressors.

• This is a specialised Asbestos Fibre Jointing Sheet which is intimately bonded with Acid resisting compound, to withstand the corrosive action of acids and chemicals. Recommended for use against hot concentrated organic, Inorganic and mineral acids including hydrochloric, sulphuric (oleum) and nitric acids, under service conditions of temperature and pressures commonly encountered in Chemical Industries.

Other Details:

• (Indian Is 2712 - 1998 Grade A/1)

spiral wound gaskets from 15mm to 3500mm ID as per international standards such as API601, ASME 16.20, ASME B16.47 A& B series, DIN, British standards, JIS etc.

spiral wound gaskets are subjected to compressibility & recovery test as per IS 7719 & sealability test are conducted at ambient/elevated pressure & temperature.

Fillers used are Graphite, Asbestos & PTFE. Compressibility & Recovery test as per IS 7719 and sealibility test are conducted at ambient pressure and temperature.

Spiral wound gaskets are approved with all major consultants including EIL & TDC.

Additional Information:

• Item Code: 122211

We have introduced a wide variety of combinations of non Asbestos packings for all applications.

All packings are available in braided rope form (standard / custom sizes) or ring form (custom sizes).

Uni Klinger provides complete range of non asbestos gland packing in Graphite, Teflon,Aramid,Carbon and Glass fiber. Enabling UKL to cater to Pump,Valve users and original Equipment manufacturers.

Uni Klinger can provide the Gland Packing for other applications where one need tight seal in static or rotating application.

Uni Klinger offers Non Asbestos Gland Packing from 3mm Sq to 25mm

Additional Information:

• Item Code: 544345